Huawei MatePad Pro 13.2 (2023) Repair
- Diagnostics 0€
- Screen Replacement (Original) Contact us
- Screen Replacement (Analog) Contact us
- Glass Replacement Contact us
- Battery Replacement (Analog) Contact us
- Battery Replacement (Original) Contact us
- Charging Port Replacement Contact us
We complete most Huawei Pad tablet repairs within 1 hour. Only more serious non-standard malfunctions may take longer, and you will be informed about this.
With the help of couriers, we can collect devices for repair from other cities. Call us and we will resolve everything immediately.
We provide a 3-month warranty for Huawei Pad repairs.
Replacing the glass or screen of the Huawei MatePad Pro 13.2 (2023) is usually done within 1-3 hours, and battery replacement within 1-2 hours. We perform the work on-site, so we focus on quick and quality execution.
Yes, we provide a 3-month warranty for the repair work on the Huawei MatePad Pro 13.2 (2023).
Yes, we can replace the camera lens of the Huawei MatePad Pro 13.2 (2023). If it breaks, we recommend covering the damaged lens with tape to prevent dust or other dirt from entering and damaging the camera, thus avoiding larger investments.
In certain cases, a full screen replacement can be avoided by only replacing the screen glass. The screen glass of the Huawei MatePad Pro 13.2 (2023) can only be replaced if the screen has no stains, spots, colored lines, and if it does not flicker. The screen must also be original.
You won’t notice, as your original screen remains.
After replacing the screen or glass, we always recommend our clients to apply a protective glass. An additional protective layer will protect your device from scratches and reduce the likelihood of breaking during impact. This is a small investment that will help save in the future.
About Huawei Pad tablet repair
Fixas repairs Huawei Pad tablets and other telecommunications and electronic devices in Vilnius. Our technicians have years of experience working with high-end devices. For Huawei MatePad Pro 13.2 (2023) repairs we provide a 3-month warranty. You can bring your device to us or use our free courier service throughout Lithuania.
Common Huawei MatePad Pro 13.2 (2023) faults
Battery capacity loss: the original Li-Polymer (Li-Po) battery has a capacity of 10,100 mAh (38.7 Wh) and a voltage of 10.8 V. After about 300–500 charging cycles, the battery loses up to 20% of its capacity, which causes the tablet to discharge faster.
Battery swelling: due to unbalanced charging or temperature fluctuations, a chemical reaction may occur, causing battery deformation.
Rapid standby discharge: power leakage while idle, often related to firmware controller failures or issues with the charging circuit.
Charging port and flex cable faults: the USB-C port often wears out – connections break, sometimes the charger does not stay connected, causing intermittent charging.
Repair services
Screen and glass replacement
The tablet is equipped with a 13.2″ 2.8K (2800 × 2000) AMOLED display with Gorilla Glass 5.
Typically, only the glass is damaged (0.33 mm) without any damage to the liquid crystal layer: free of color lines, spots, or flickering. In such cases, glass replacement is the most economical solution.
If the liquid crystal layer (LCD) is also damaged, we replace the entire display module (AMOLED + glass) with original or OEM parts.
Battery replacement
We replace the original 10,100 mAh Li-Po battery with a new, identical capacity module manufactured according to Huawei’s quality standards.
Repair time: 1-2 hours, a full diagnosis is performed after replacement: capacity reset, cycle count reset.
Charging port, button and other component replacement
We replace the USB-C charging port flex cable, solder corroded contacts, and replace the speaker, microphone, volume, and power button module.
We perform firmware updates to avoid unstable charging or charging interruptions.
Battery specifications and common faults
The Huawei MatePad Pro 13.2 (2023) battery is a Li-Po polymer battery with two cells, each with a nominal capacity of 5,000 mAh (7.7 V), and a total “typical” capacity of 10,100 mAh (3.85 V), ~38.9 Wh. The manufacturer claims that using an 88 W charger, it reaches 80% charge in 40 minutes, and fully in 65 minutes.
Common battery faults
Capacity loss: within 1–2 years, the battery loses >20% of its capacity, resulting in a more noticeable shorter operating time.
Swelling: due to excessive deep charging or temperature spikes, the battery may swell and raise the case.
Charging problems: due to corrosion of the Type-C port or broken contacts, the device fails to charge or charges intermittently.
Rapid discharge: due to software bugs or internal short circuits, the battery rapidly drops from 100% to 0%.
Battery replacement at our shop takes 1–2 hours – quickly, at an affordable price, with an original or certified equivalent battery module.
Screen and glass repairs
Common screen faults:
Cracks and scratches on the PaperMatte surface (after a year of intensive writing with a stylus).
Burn-in – OLED color degradation after extended display of a static image.
Flickering or bands – due to loosely connected plugs or damaged display IC traces.
Digitizer faults – reacts irregularly to touches or completely “loses connection”.
If the screen works without color lines, does not shine with spots, and the sensor registers touches, it is often enough to replace just the protective glass. The entire screen module is more often replaced when the OLED layer is broken or when there is a serious backlight failure.
Reliable Huawei Pad repairs at a good price
Contact Fixas for minor or major Huawei MatePad Pro 13.2 (2023) repairs. We specialise in Huawei Pad tablets and other devices. Customers recommend us to others and leave positive reviews online. Returning customers always receive discounts, and we offer reliable repairs at a good price. We operate throughout Lithuania, in Vilnius we are located in Naujamiestis, opposite the RIMI Hypermarket shopping center. In other cities, we can collect your device free of charge for a prompt repair.
