iPad Pro 12.9 (3rd Gen) Repair
- Diagnostics 0€
- Screen Replacement (Original) 299€
- Glass Replacement 229€
- Battery Replacement (Analog) 149€
- Charging Port Replacement Contact us
- Housing Replacement Contact us
We complete most iPad repairs within 1 hour. Only more serious non-standard malfunctions may take longer, and you will be informed about this.
With the help of couriers, we can collect devices for repair from other cities. Call us and we will solve everything immediately.
We provide a 3-month warranty for iPad tablet repairs.
iPad Pro 12.9 (3rd Gen) (A2014, A1895, A1876) glass or screen replacement is usually performed within 1-3 hours, and battery replacement within 1-2 hours. We perform the work on-site, so we focus on quick and quality execution.
Yes, we provide a 3-month warranty for repair work on the iPad Pro 12.9 (3rd Gen) (A2014, A1895, A1876).
No, if your iPad Pro 12.9 (3rd Gen) (A2014, A1895, A1876) tablet screen does not respond only to touch, you only need to replace the glass itself, as the touch sensor for iPad tablets is replaced together with the glass.
In certain cases, a full screen replacement can be avoided by replacing only the screen glass. The iPad Pro 12.9 (3rd Gen) (A2014, A1895, A1876) screen glass can only be replaced if the screen has no stains, spots, colored lines, and if it does not flicker. The screen must also be original.
You won’t notice, as your original screen remains intact.
After screen or glass replacement, we always recommend our clients to apply a protective glass. An additional protective layer will protect your device from scratches and reduce the likelihood of breaking during impact. This is a small investment that will help save in the future.
iPad Pro 12.9 (3rd Gen) repair in Vilnius
Fixas is a specialist Apple device repair center in Vilnius. Our technicians provide high-quality repairs for your iPad Pro 12.9 (3rd Gen) tablet. This model (A2014, A1895, A1876) has a complex Liquid Retina display and a powerful A12X Bionic chip. Repairs require specialist equipment and precise work.
Our team uses professional microsoldering and diagnostic equipment to repair external damage and faults within the motherboard. If you cannot visit our shop in Naujamiestis, across from RIMI Hypermarket, we offer free device pickup by courier throughout Lithuania.
iPad Pro 12.9 (3rd Gen) repair times
| Service | Duration | For iPad Pro 12.9 (3rd Gen) repairs we provide a 3-month warranty. |
| Screen glass replacement | 1–3 hours | |
| Full screen module replacement | 1–2 hours | |
| Battery replacement | 1–2 hours | |
| Charging port (USB-C) repair | 2–4 hours |
When glass replacement can save money
The iPad Pro 12.9 (3rd Gen) uses a laminated display, but our technology allows us to separate the top glass from the matrix.
When is it possible? If your device’s LCD matrix shows a clear image (no black spots, vertical lines, or flickering), it’s sufficient to replace only the top glass with an integrated touch layer sensor (digitizer).
Advantage: The original Apple screen is preserved, and the repair cost is significantly less than replacing the whole module.
Important: The glass of this model is only 0.5 mm thick, so we use vacuum separators and temperature-controlled machines to avoid damaging the polarizing layer.
Full screen module replacement
If colored bands appear or the screen is completely dark, we install a new module. The iPad Pro 12.9 (3rd Gen) display has a 2732 × 2048 pixel resolution (264 ppi) and supports ProMotion (120Hz) technology. We use high-quality components that provide 600 nits brightness and match the original colors.
Battery replacement and diagnostics
This iPad model has a 9720 mAh (36.71 Wh) lithium polymer battery. After approximately 300–500 charging cycles, its capacity starts to rapidly decline.
Symptoms: The iPad shuts down at 20%, overheats, or the screen begins to lift (battery swelling).
Our process: Before replacement, we measure current with diagnostic equipment. We install certified Li-Po modules with a nominal voltage of ~3.8 V, then calibrate the software so that iOS reports battery health accurately.
Component repairs
USB-C charging port repair
The third-generation iPad Pro uses USB-C supporting PD 3.0 (Power Delivery). Often, the internal contacts (‘pins’) get damaged due to dirt or non-original cables.
We not only replace the port itself but also, if necessary, repair the PMIC (Power Management Integrated Circuit) circuit, so the device can again accept full 18W–30W charging power.
Button and housing repair
The iPad Pro 12.9 (3rd Gen) casing is relatively thin, so after a strong impact, it can bend slightly, and the physical buttons (Power/Volume) can get stuck.
We replace rubber membranes (tactile switches) and straighten the case so that new glass fits without putting pressure on the LCD panel.
Liquid damage and logic board repairs
If the device has come into contact with liquids, we perform ultrasonic cleaning, remove corrosion, and reball damaged IC components (Wi-Fi modules, audio codecs).
Why choose Fixas?
Free diagnostics: As soon as we receive the device (in-store or via courier), we diagnose the issue within minutes and provide a final price.
Transparency: No hidden fees. If we find that the repair is not cost-effective, we always inform the client.
We provide a warranty on all parts and services.
Experience: We specialize exclusively in Apple repairs and know the construction of iPad Pro models.
Recommendation: After any screen replacement, we strongly advise applying a protective tempered glass. For just a few euros, it absorbs impacts and helps protect your 12.9-inch screen from further damage.
Address: Kedrų g. 5, Vilnius (Naujamiestis)
Contact: Call us for repair advice or fill out the request form on our website to get your iPad Pro working again.
